In order to compare DM and mitreh solution, it should be kept in mind that three different substances should be used for sediment removal, sediment prevention, and corrosion prevention, and in this regard, usually materials such as acids for sediment removal, DM for sediment removal, and in some cases Materials are also used to remove oxygen from water.

Mitreh's antifreeze and antifreeze has a great performance in terms of heat transfer due to its high heat capacity, and it is considered the most economical and available fluid for this purpose. Water alone has a relatively low boiling point, which means that it boils at a high temperature, and it also has a high freezing point, which means that it freezes quickly in the cold, most importantly due to the presence of solutes, ions, dissolved oxygen, etc. Rotting and rusting of facilities and ducts.

Corrosion is one of the most important problems in the cooling tower and causes cost loss and reduced efficiency of the tower. The presence of various factors in the tower makes it easy for corrosion to occur in the cooling tower. The presence of water as an electrolyte and also the presence of metals of different types in the tower as cathode and anode provides the basis for creating a chemical cell on a large scale.

Corrosion in steam boilers is caused by chemical and electrochemical reactions of metal with its surrounding environment. The most important corrosion factors in steam boilers are oxygen corrosion, carbon dioxide corrosion, corrosion due to pH drop, alkalinity corrosion, corrosion of hydrolyzable salts and corrosion of organic materials.

Hydrogen sulfide is an almost stable gas in the range of temperatures and pressures used in oil and gas exploitation systems, although in the presence of strong oxidants such as O2 and + Fe3, it can turn into elemental sulfur, which usually occurs in gas pipelines. It happens with high pressure or storage facilities. Hydrogen sulfide in concentrations higher than 80% is also found in some oil and gas reservoirs.

Corrosion in various industries, including in the oil and gas industries, imposes heavy sums of money to replace or repair equipment and machinery every year. Every year, 5% of the country's gross national product is wasted due to corrosion, and out of this 5%, about a fifth of it occurs in the oil, gas and petrochemical industries. One of the types of corrosion in oil and gas industries is corrosion caused by hydrogen sulfide gas.

In industries such as oil, gas and petrochemical, there is always an attempt to prevent the formation of deposits using different methods in equipment such as heat exchangers and boilers. In this field, a lot of money is spent on chemical materials and additives. But most industrial heat exchangers are exposed to sedimentation due to various reasons such as the low quality of water in different areas. These deposits are mostly formed in the pipes of the converters. In order to reduce the losses caused by sedimentation, the converter must be continuously monitored and cleaned.

The high surface tension of sea water and the high probability of formation of foam in MED and MSF systems are unpredictable. These foams are usually formed when organic compounds increase in salt water or brine.

Creating a floor can cause many problems and damages. Loss and overflow of edible materials, reduction in efficiency and speed of the process, reduction in the capacity of tanks and even stopping production are among the problems of foaming.

Boiler feed water should be free of hardness. Sometimes, due to the short or improper operation of the hardness device or the failure to regenerate the resins in time, some hardness enters the boiler feed water. Increasing the water temperature in the boiler reduces the solubility of water solutes. The water near the hot surfaces becomes saturated and the conditions for deposition of less soluble substances are provided and eventually sediment is formed.

Mitreh cooling tower antifouling is one of the innovative products of Abrizan company. Using an excellent combination, this product serves all industries and huge buildings that use cooling towers to exchange and remove water heat. By preventing the formation of sediment, the mitreh product increases the performance of this system, a system that plays the role of a heat exchanger.

همانند موجودات زنده که بدون آب نمی توانند زنده بمانند، پالایشگاه های نفت و کارخانه های پتروشیمی نیز بدون آب نمی توانند کار کنند. آب در سیستم های خنک کننده آبی، برای تهیه بخار و سیستم اطفا حریق استفاده می شود. فرآورده های نفتی و سوخت هایی که پس از تقطیر و فرآیندهای مختلف کاتالیزوری و کراکینگ تولید می شوند، باید سرد شوند. آب بهترین سیال برای این کار است.

Antifreeze is a colored liquid that mixes with water and helps in regulating the engine in extreme temperatures. and is pumped throughout the engine block to maintain a uniform operating temperature. In addition to temperature regulation, mitreh antifreeze is also effective in preventing corrosion.