In order to compare DM and mitreh solution, it should be kept in mind that three different substances should be used for sediment removal, sediment prevention, and corrosion prevention, and in this regard, usually materials such as acids for sediment removal, DM for sediment removal, and in some cases Materials are also used to remove oxygen from water.

In industries such as oil, gas and petrochemical, there is always an attempt to prevent the formation of deposits using different methods in equipment such as heat exchangers and boilers. In this field, a lot of money is spent on chemical materials and additives. But most industrial heat exchangers are exposed to sedimentation due to various reasons such as the low quality of water in different areas. These deposits are mostly formed in the pipes of the converters. In order to reduce the losses caused by sedimentation, the converter must be continuously monitored and cleaned.

Boiler feed water should be free of hardness. Sometimes, due to the short or improper operation of the hardness device or the failure to regenerate the resins in time, some hardness enters the boiler feed water. Increasing the water temperature in the boiler reduces the solubility of water solutes. The water near the hot surfaces becomes saturated and the conditions for deposition of less soluble substances are provided and eventually sediment is formed.

Mitreh cooling tower antifouling is one of the innovative products of Abrizan company. Using an excellent combination, this product serves all industries and huge buildings that use cooling towers to exchange and remove water heat. By preventing the formation of sediment, the mitreh product increases the performance of this system, a system that plays the role of a heat exchanger.

حدود یک دهه است که محلول ضد رسوب جدیدی وارد بازار شده، ضد رسوبی که نقش مهمی در محافظت از انواع سیستم های گرمایشی و سرمایشی در مقابل تشکیل رسوبات دارد. این محصول تخصصی میتره نام دارد و اختراع نوین شرکت آبریزان می باشد.

برج خنک کننده همانطور كه از نامش پيداست براي خنك كردن به كار مي رود. تجهيزاتي كه در صنعت به منظور انتقال حرارت به كار مي روند از جمله تجهيزات مهم بوده كه در اين ميان برج خنک کننده براي ادامه و تداوم عمليات و ديگر فرآيندها موثر و كاربردي است.

يكي از روشهاي توليد آب شيرين جهت مصارف صنعتي، استفاده از آب شيرين كن هاي چند مرحله اي حرارتي به منظور شيرين سازي آب دريا ميباشد. با توجه به بالا بودن تركيبات محلول و نامحلول در آب دريا و همچنين شوك دمايي بالا در پكيج هاي آب شيرين كن، رسوب گذاري در اين پكيج ها غير قابل اجتناب ميباشد. به همين دليل ميبايست رسوب برداري دوره اي ازدستگاههاي آب شيرين كن انجام گردد.