Description
CS Mitreh (complete solution for anti-freeze, anti-boil, anti-scale, anti-corrosion, and anti-foam)
Water as the most important fluid for heat transport in domestic cooling systems (such as radiators ), industries (cooling and heating systems), automobiles (automotive cooling systems and radiators), buildings (engine rooms) and all engineering processes Water is considered. This fluid has a high thermal conductivity in terms of heat transfer and is also the most affordable, and available fluid. But it has some shortage in some aspects. Water alone has a relatively low boiling point, which means it boils at high temperatures and also has a high freezing point, which quickly freezes and causes a lot of damage; most importantly, due to the presence of salts, ions, Dissolving oxygen and … causing decay and rusting of facilities and ducts. Therefore, using water alone will cause problems in these systems. The best strategy in this case is to reduce and even eliminate the disadvantages of water and the use of improved water with better properties.
In order to optimize the performance of water systems and installations, Abrizan Company has been invented a solutions with special properties to improve water performance in system. This solution, in addition to raising the boiling temperature and reducing the freezing temperature, prevents the formation of deposition and clogging of the ducts and installations and also prevents corrosion, especially during the system overhaul. As a result, after the system is started again, none of the former problems, such as clogging or bursting of pipes, is expected to increase, and the useful life of the system and equipment increases.
Usage:
The existing solution contains compounds that, by injecting it into the water in the facility, prevents the freezing of water at low temperatures and greatly increases the boiling point of water, there for useful life of the system increased, preventing the formation of sedimentation, and corrosion. Using this solution is very simple and according to the calibration table, the appropriate amount of solution is injected into the system according to the type of application. Then, after it combining with water, simultaneously generates a heat dissipation, creates a thermal equilibrium throughout the system. On the other hand, there are compounds in this solution that prevent the corrosion of the facility and the formation of deposits.
Calibration table of Mitreh CS (anti-freeze, anti-boil, anti-scale, anti-corrosion, and anti-foam)
refrigeration Range | No. | Product Usage | Product code | temperature Range | Consumption Amount |
1 | Household equipment | CS0026 | 0 to -15 | 1 liter per 3-2 liters of water | |
2 | -15 to -23 | 1 liter per 2-1 liters of water | |||
3 | -23 to -34 | 1 liter per a liter of water | |||
4 | -34 to -48 | 1 liter per 0.5-1 liter of water | |||
5 | Installation of refrigerating industry | CS0032 | 0 to -15 | 1 liter per 3-2 liters of water | |
6 | -15 to -23 | 1 liter per 2-1 liters of water | |||
7 | -23 to -34 | 1 liter per a liter of water | |||
8 | -34 to -48 | 1 liter per 0.5-1 liter of water | |||
9 | gasoline cars | CS0011 | 0 to -15 | 1 liter per 3-2 liters of water | |
10 | -15 to -23 | 1 liter per 2-1 liters of water | |||
11 | -23 to -34 | 1 liter per a liter of water | |||
12 | -34 to -48 | 1 liter per 0.5-1 liter of water | |||
13 | diesel cars | CS0014 | 0 to -15 | 1 liter per 3-2 liters of water | |
14 | -15 to -23 | 1 liter per 2-1 liters of water | |||
15 | -23 to -34 | 1 liter per a liter of water | |||
16 | -34 to -48 | 1 liter per 0.5-1 liter of water | |||
Thermal Range | 1 | Household equipment | CS0026 | Up to 110 °C | one liter per 500ml of water |
2 | Up to 124 °C | one liter per 250 ml of water | |||
3 | Up to 140 °C | one liter per 250 ml of water | |||
4 | Up to 197 °C | pure solution | |||
5 | Installation of refrigerating industry | CS0032 | Up to 110 °C | one liter per 500ml of water | |
6 | Up to 124 °C | one liter per 250 ml of water | |||
7 | Up to 140 °C | one liter per 250 ml of water | |||
8 | Up to 197 °C | pure solution | |||
9 | Gasoline cars | CS0011 | Up to 110 °C | one liter per 500ml of water | |
10 | Up to 124 °C | one liter per 250 ml of water | |||
11 | Up to 140 °C | one liter per 250 ml of water | |||
12 | Up to 197 °C | pure solution | |||
13 | Diesel cars | CS0014 | Up to 110 °C | one liter per 500ml of water | |
14 | Up to 124 °C | one liter per 250 ml of water | |||
15 | Up to 140 °C | one liter per 250 ml of water | |||
16 | Up to 197 °C | pure solution | |||
– Above calculation used for urban water. If using hard water, contact the nearest technical office of Abrizan in your area. – Dear consumer, Before you insert the CS solution into the system, make sure that the facility is clean and has no scale, and if there is scale and sedimentation , rinse it with industrial, cold and automobile Mitreh solutions. |
Reviews
There are no reviews yet.