General Industrial Mitreh (MSA1110)

Description

General Industrial Mitreh (MSA1110)

de-Sedimentation, anti-scale ,and anti-corrosion

In many industrial devices, the issue of heat transfer is a major issue affecting the efficiency of the device. The process of heat exchange between two fluids with different temperatures separated by a solid wall occurs in many engineering applications. In most cases, the water is chosen as one of the two heat transfer fluid due to its high thermal capacity. One of the most important and costly problems that every industry faces is the formation of sedimentation on surfaces during work, which increases the resistance to heat transfer between the two fluids and causes corrosion in the systems.

There are several ways to eliminate these sediments. But none of the existing methods has a 100% return and may also have disadvantages for facilities and the environment.

Mitreh has been patented, and mass production during long-term research and spending a lot of expenses at the center of the growth of the Organization of Scientific and Industrial Research of Iran. This new product has been introduced as a state-of-the-art initiative for saving energy and water and has been praised and appreciated by all government executives, factories and consumer industries.

Mitreh, removing sediment, prevents the formation of new sediments and also prevents corrosion of surfaces. Mitreh has a neutral pH and does not cause any corrosion at the plant, reduces the rate of corrosion of the water; it acts as an inhibitor of corrosion.

Unlike washing acid or mechanical deposition, it is not necessary to remove the device from the circuit and stop the operation (which causes waste of energy, time and cost), and not only one part, but the whole course of the water flow depletion. It is able to break down the intermetallic and ionic bonds of various types of carbonate deposits, and after decontamination and complete dissolution of sediments and heavy loading of water, dewatering is carried out. It can also be injected into the system to prevent the formation of new sediments and prevent corrosion (according to the calibrated table).

Some benefits:

. Mitreh removes previous system deposits (calcium and magnesium carbonate deposits and calcium and magnesium sulfate deposits).

. It does not allow the new sedimentation  to be formed ,regardless the kind of water consumed.

. The effect will be stable for 1 year in the system.

. Using Mitreh does not need to stop the system (as opposed to acid washing).

. Unlike acid, it does not have any effect on the skin and respiratory system.

. It does not have any harmful effects, on equipment and pipes..they will be safe against corrosion, unlike other methods.

. It is environmentally friendly and has no harmful environmental effects.

. It saves water and energy.

. It is economical and cost effective compared to other methods.

. Using Mitreh causes high efficiency in radiator blowers, radiators, chillers, cooling towers, boilers, etc.

Calibrates amount of using Mitreh:

In preventing the formation of deposits in different systems, depending on the water hardness of the input, the amount of solvent consumption is different, which is, in fact, for every 1,000 liters of circulating water in the system, between 1 and 6 liters of solution is sufficient to balance the system for one year Secure any deposition.