Today, it has been proven that the base of substances that work effectively at lower concentrations than required amount, must be polymers. The combination of polymers with impurities in water is not commensurate with the amount of impurities, but the certain concentration injection of Mitreh 1149 into water creates an environment that minimizes the possibility of scale formation and corrosion. This solution protects the system from corrosion by preventing the growth of crystals from forming sedimentary layers as well as by forming protective layers on the metal surface.
Calibration of Using Mitreh 1149 Solution:
In order to prevent the scale formation and corrosion in high pressure boilers the dosage is different, depending on the hardness of the feed water and the type of boiler alloy.
To calculate more accurately, consider the following:
1- Sample analysis of system feed water
2- Ensuring that the system is clean (in terms of scale and other contaminants)
3- The amount of water circulating and the volume of water consumed (make-up)
4- Complete system monitoring and field inspection of various parts of the circuit in terms of corrosion
Some Physical Properties of the Solution:
|Liquid||Physical state||6.4 – 6.9||pH|
|Very transparent brown||Color||98 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-5 – -2||Freezing temperature range (˚C)|
|1.17 – 1.193||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|