Most of the water consumed for feeding the boilers is supplied by software with ion-exchange or water free of anions and cations. Although hardness of consumed waters in boilers is between 0.1 and 2 ppm, but this insignificant amount can cause scale formation in the boiler. Mitreh 0109 solution is used to remove scales formed in a variety of medium and high pressure boilers. This solution contains some special acids with corrosion control agents in boilers that remove high volumes of carbonate, sulfate and phosphate scales while having a very low corrosion rate compared to descalers and it can be injected into the operating system. This will remove scales all parts of the boiler close system as well as the pipes.
Calibration of Using Mitreh 0109 Solution:
In order to remove scales formed in high and medium pressure boilers, the volume of solution consumption varies depends on the amount of scales present in the system, and to obtain the best performance you need to consult the technical experts of the company.
System water analysis and scale formed at the installation, estimation of approximate amount of scale available at the installation, the volume of make-up water during the day, and the kind of alloys in the various parts of the system are required prior the scale removing operation. Get better advice from the experts of Abrizan Company.
Some Physical Properties of the Solution:
|Very transparent brown||Color||98 – 99||Boiling temperature range (˚C)|
|Mild odor||Odor||-3– -1||Freezing temperature range (˚C)|
|1.049 – 1.058||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|