Mud and suspended particles and sludge enter the desalination machines with water for treatment. Most of these particles are usually removed from the water by pre-treatment methods and then enter into the R.O. But for algae and bacterial contaminated water, chemicals should be used to remove these agents. Growth of biological and bacterial communities in all parts of the treatment device, especially in the membrane, can cause algae growth and destroying the membrane and producing contaminated water. The chemicals used to do this should not damage the water treatment device, and specially the membranes, and of course, its effect should not remain in the water. Mitreh0046 solution, with its special properties, prevents the growth of biofouls and eliminates large volumes of germs, algae and bacteria without damaging the water treatment device.
Calibration of Using Mitreh 0046 Solution:
In order to eliminate environmental pollutants (especially algae that growth in contaminated water) with Mitreh 0046 solution, dosage and instructions is provided by technical experts, according to microbial analysis of water. This solution can be continuously injected into the inlet water of the R.O by dosing pump or injected into pools where water is temporarily stored.
Some Physical Properties of the Solution:
|Liquid||Physical state||7.1 – 7.6||pH|
|Transparent blue-green||Color||95 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-1 – 0||Freezing temperature range (˚C)|
|1.03 – 1.042||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|