Anti-scale & Anti-corrosion Solution of Cryogenic Installations
Most food industry factories require cryogenic installations depending on the conditions and characteristics of their production lines. These installations may include the following:
- Refrigerating Room: for storing raw materials and product which is one of the basic installations of many food factories.
- Air Conditioning: Air conditioning systems are one of the necessities of food factories in order to provide the required temperature and standard in the production hall.
- Ice Making: Ice-making units, as separate production units, are built in factories that use ice.
- Rapid Freezing System: The cooling industry is used whenever the product needs to be cooled quickly without creating Thrush and reducing quality and discoloration.
Cryogenic installations in the food industry are often subject to deposition and corrosion due to the circulating water of varying hardness in their orbit. The formation of scales on the wall of the installation creates a heat-resistant layer and in sensitive industries it is possible to cause irreparable damage and food loss due to insufficient cooling. Also, the corrosion problem in these installations has Perforations the installations and pipes and it is possible to penetrate the water and anti-scale and anti-corrosion products into the food. In these sensitive industries, while preventing scale and corrosion at the installation, materials should be used to prevent food spoilage in any event of leakage or logging.
Food grade cryogenic Mitreh solution with FG1060 code is synthesized and manufactured to prevent the formation of scale and prevent the corrosion of cryogenic installation food industry without harmful chemical effects in the food industry, reducing depreciation, increasing productivity and reducing energy consumption in the food industry. .
To prevent deposition and corrosion of FG1060 solution, inject into the system a given dose of the solution according to the water hardness and physical and chemical properties of the water. Consult technical experts for accurate dosage determination and any information about this solution.
If the water entering the system is not fed by the resin hardener and the R.O system, a higher dose of solution is usually used.
Some Physical Properties of the Solution:
|Liquid||Physical state||5 – 5.3||pH|
|Very light brown||Color||97 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-18 – -17||Freezing temperature range (˚C)|
|1.175 – 1.183||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|