Biologically due to the direct contact of water with the air and the environment, as well as the presence of hard water in the installations, these environments are the source of the growth of many bacteria, microbes, viruses, algae and mosses. These microorganisms, are also the source of the spread of Contamination and human diseases, in addition to reduce installation efficiency due to the formation of a biofilm layer of organic matter. On the other hand, some microscopic organisms, such as bacteria, fungi, and all kinds of macroscopic organisms such as algae, cause microbial corrosion in installation system. These organisms usually tolerate and grow and multiply in environments with pH between 1-11 and temperature between -30 to 180 degrees Fahrenheit and a maximum pressure of 15000 psi, which this type of corrosion actually results in the destruction of metal. Microbial corrosion is due to the presence and activity of sulfate-reducing bacteria (SRB), sludge-forming bacteria, iron-oxidizing bacteria, nitrogen-sulfur oxidizing bacteria, and some other microorganisms such as algae and fungi. Therefore, it is important to eliminate these pollutants.
Calibration of Using Mitreh 0083 Solution:
In order to eliminate the microorganisms that grow in the infected systems, according to the microbial analysis of the contaminated water source, the amount and method of use are different. In some cases that microbial contamination is high, it is required initial shock followed by periodic and irregular injections.
- For higher precision and more accurate dosage, it is necessary for the consumer to conduct microbiological tests from the feed water in a valid laboratory and deliver the result to the company’s technical office.
- Announcing the technical properties of the installation, the amount of water consumed and all other information helps the company’s experts to calculate more accurately.
- Co-ordinate with the technical office experts of the company to wash the system before periodic injections.
- Chemical and Microbiology Laboratory of Abrizan Company, located in Shiraz pharmaceutical products technology incubator, Fars, Iran, is ready to cooperate.
Some Physical Properties of the Solution:
|Liquid||Physical state||7.1 – 7.5||pH|
|Transparent blue-green||Color||97 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-1 – 0||Freezing temperature range (˚C)|
|1.01 – 1.02||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|