Special Anti-scale & Anti-corrosion Solution for Chiller & Absorption
Chiller is a device for cooling based on the compression or absorption of a liquid. The liquid, which is usually water, can be used for air cooling or devices that typically flow in a cycle and into a heat exchanger.
The chillers are divided into two types of compression and absorption. Condensing chillers using electric energy and absorption chillers using thermal energy make cold.
Water that circulates in the chiller system plays a major role in heat transfer, so it must always be controlled in terms of sedimentation rate, corrosion and biological contamination. Hard water forms the calcium carbonate scale shell, which can cause many problems. This shell, in the form of a scale on the inner surfaces of the water-carrying pipes, reduces the water transfer capacity and reduces heat transfer.
The industrial Mitreh for Chiller & Absorption prevent the sedimentation of particles on the walls and suspend them in solution by controlling and surrounding the calcium and magnesium carbonates and sulfates. It also prevents corrosion by forming a protective layer on the walls and extends the useful life of the installation.
To prevent sedimentation and corrosion, inject solution code MSA1069 at a dosage of 10% continuously (depending on the amount of water consumed – make-up).
If inlet water into the system is not fed from the resin hardener and the R.O system, the dosage will increase.
It is advisable to consult the experts of this company to ensure the improvement of the performance of injectable additives and to determine and measure all parameters of water process.
Some Physical Properties of the Solution:
|pH||5.2 – 5.3||Physical state||Liquid|
|Boiling temperature range (˚C)||96 – 97||Color||Very light brown|
|Freezing temperature range (˚C)||-18 – -16||Odor||Odorless|
|Solubility in water||Dissolves rapidly||Density at 20˚C (gr⁄ml)||1.171 – 1.19|