Corrosion and scale control in steam generation systems and their associated devices during operation are essential. Otherwise it will cause problems such as perforation of pipes, lack of proper heat transfer, increasing power consumption, system outage, reduced efficiency, and ect. Effective protection of the system requires simultaneous control of the operating factors and proper selection of materials to treat the properties of the water consumed. Mitreh 1148 special solution based on polymeric and organic compounds with unique corrosion control agents, injected into boiler water, prevent the formation of scale layers between 70% to 100%, in addition to reduce corrosion rate by more than 90%.
Calibration of Using Mitreh 1148 Solution:
In order to prevent of scale formation and corrosion in medium pressure boilers system, the dosage of solution consumption is different depend on the hardness of feed water and the type of boiler alloy.
The appropriate dosage shall be informed by the relevant technical experts and facility engineers, and if there is any uncertainty or need for advice, get advice from the expert of technical office of Abrizan Company.
Some Physical Properties of the Solution:
|Liquid||Physical state||5.1 – 5.7||pH|
|Very transparent brown||Color||98 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-4 – -2||Freezing temperature range (˚C)|
|1.107 – 1.109||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|