Description
Industrial Mitreh for Cooling Tower (MSA1065)
Anti-scale and anti-corrosion for cooling towers
Cooling tower is a means to get the warmness of water, through evaporation. Machines produce heat during the operation, in order to maintain their performance, heat should be reduced as much as possible. Usually the heat transmitted to the circulating water. During heat transfer and exchange the presence of sediment can be a big obstacle. Sediments and scale is the main reason of productivity reduction. Other problems of cooling towers are the corrosion of internal parts of the tower and the growth of algae and biological bacteria. Therefore, in order to stabilize the efficiency of the performance and prevent corrosion MSA1065 solution should be injected in system.
Usage:
To calculate the amount of material consumed, Mechanism of the cooling tower should be announced to the technical office. Different types of cooling tower:
1- Cubic Design, Fiber Glass, Marley (Trapezoidal), Marley (Cubic), Centrifugal, Steel Contrflo, Round cooling towers
- Having Fan (Mechanical) and without Fan (Natural)
- Wet-cooling tower, dry-cooling tower, dry-wet cooling tower
- Cooling tower with cross-flow air and air-to-air flow
Since the basis of the work of all cooling towers is based on the establishment of a greater contact between the flow of hot water and cold air, and therefore the heat exchange between these two. It is necessary to determine the hardness of water and the amount of water consumed, then according to the calibration table injected the amount of material required by dosing the pump into the water system.
(Table F6 )Calibration industrial Mitreh for cooling towers (MSA1065) | |||
No | Water hardness(ppm) | Required quantity for 1000 liters of consumed water (ml) | Description |
1 | 0-50 | 250 | Water hardness in calcium and magnesium carbonate and calcium and magnesium sulfate |
2 | 50-100 | 500 | Water hardness in calcium and magnesium carbonate and calcium and magnesium sulfate |
3 | 100-150 | 750 | Water hardness in calcium and magnesium carbonate and calcium and magnesium sulfate |
4 | 150-200 | 1000 | Water hardness in calcium and magnesium carbonate and calcium and magnesium sulfate |
5 | +200 | Consulting technical office |
In order to prevent or eliminate algae and environmental pollutants, the use of anti-bio fouling solutions is essential; HE0083, HE0096, HE0085, HE0078 codes.
Reviews
There are no reviews yet.