New technology for scale removing in exchangers has greatly reduced the use of acid due to its high corrosive and human and environmental damaging effects. The Mitreh 1135 solution with neutral pH, high volumes of non-acidic deposition and anti-corrosion substances, protects the installation against any corrosive and sedimentary agents in addition to removing scales in the system.
Calibration of Using Mitreh 1135 Solution:
In order to scale removing in exchangers with Mitreh1135 solution, the volume of solution consumption varies depending on the amount of scales present in the system and to obtain the best performance you need to consult the technical experts of the company.
System water analysis and scale formed at the installation, estimation of approximate amount of scale available at the installation, the volume of make-up water during the day, and the kind of alloys in the various parts of the system are required prior the scale removing operation. Better advice shall be obtained from relevant experts at the Abrizan Company.
In the case of severe corrosion in the system and thinning of the body of the installation, carry out the deposition more carefully and consult the relevant experts.
Some Physical Properties of the Solution:
|Liquid||Physical state||6.7 – 7.8||pH|
|Very transparent brown||Color||98 – 99||Boiling temperature range (˚C)|
|Odorless||Odor||-4 – 0||Freezing temperature range (˚C)|
|1.076 – 1.087||Density at 20˚C (gr⁄ml)||Dissolves rapidly||Solubility in water|