industrial Mitreh for Low, medium, and high pressure boilers (MSA1148 & MSA1149)
anti-scale and anti-corrosion for low, medium and high pressure boilers.
The boiler is basically referred to as a pressure vessel under which the fluid water is heated inside the water phase to change the phase and absorb energy and use outside of that reservoir. In practice, this heat is generated by combustion of fossil fuels, nuclear energy, or electricity. These boilers are classified according to the water vapor pressure:
1. Low pressure boilers
2. Medium pressure boilers
3. High pressure boilers
High pressure boilers are designed to produce water vapor at pressures above 25 bar. At the bottom of the pressure, the boiler is placed in a low-pressure steam boiler group.
There are two main boilers , which control boilers to optimize. These two flows include the flow of fuel and water. Since the water entering the boiler is hardened, due to the heat of temporary hardening of the water, it deposits carbonates and sulfate cations such as calcium and magnesium. Over time, these sediments act as an block and prevent heat transfer. As a result, energy consumption has risen and if the acidity, chemicals or physical methods are not used to eliminate these deposits, it will increase the corrosion and wear and tear of the system. Therefore, the use of an appropriate additive to prevent sedimentation and corrosion prevention, which leads to increased efficiency, reduced energy consumption and reduced boiler wear and tear. The average useful life of a steam boiler is at least forty years. It is clear that the regular maintenance and maintenance is effective on the efficiency and performance of the system.
Industrial Meitreh have been synthesized and manufactured specifically for medium pressure and low pressure boilers (MSA1148 code) and industrial high pressure boilers (code MSA1149) by ABIRIZAN Company.
The Food Grade products (FG1140) and (FG1141) are used in the baking industry steam industry for all baking processes or in all industries that use steam-powered steam boilers for oral consumption.
According to the analysis and hardness of the water inlet system, inject the required amount of solution (MSA1148) or (MSA1149) with a dosing pump or alternately into the system (obviously, the over use of the above material Does not create technical problem )
|Table F2 – Calibration of Industrial Mitreh for Low, Medium and High Pressure Boilers (MSA1148) (MSA1149)|
|Explanation||Usage amount per 1000 liter water in circulation||Water hardness (ppm)||No.|
|To prevent the formation of carbonate and sulfate deposits, cations such as calcium and magnesium have been formulated.||250 cc||5-20||1|
|500 cc||20 –60||2|
|Consult with technical office||+120||5|
contact the technical office for more information.