anti-fouling

The purpose of this study was to investigate the effectiveness of Mitreh MDA0102 scale remover solution in industrial water environments according to NACE standards in two environments: calcium carbonate and calcium sulfate, and to compare it with acid washing. According to this study, this solution is a non-corrosive solution, unlike the solutions used in acid washing, which greatly increase corrosion. Also, the results of couponing indicated that the presence of Mitreh vector sediment solution will prevent further corrosion by forming a thin layer on the heat transfer surface.

Mitreh Cooling Tower Anti-Fouling is one of the innovative products of Abrizan Company. This product, using an excellent composition, serves all industries and large buildings that use cooling towers to exchange and remove water heat. Mitreh's product prevents the reduction of the performance of this system by preventing the formation of fouling. A system that plays the role of a heat exchanger.

Any system where temperature and water are the main elements for its operation inevitably requires the invention of Abrizan Company, called Industrial Mitreh, because wherever there is temperature and water, the formation of sediment is inevitable, unless a substance is used that suspends these sediments. This is the main function of an excellent anti-sediment solution.

Corrosion is one of the most important problems in the cooling tower and causes cost loss and reduced efficiency of the tower. The presence of various factors in the tower makes it easy for corrosion to occur in the cooling tower. The presence of water as an electrolyte and also the presence of metals of different types in the tower as cathode and anode provides the basis for creating a chemical cell on a large scale.

In industries such as oil, gas and petrochemical, there is always an attempt to prevent the formation of deposits using different methods in equipment such as heat exchangers and boilers. In this field, a lot of money is spent on chemical materials and additives. But most industrial heat exchangers are exposed to sedimentation due to various reasons such as the low quality of water in different areas. These deposits are mostly formed in the pipes of the converters. In order to reduce the losses caused by sedimentation, the converter must be continuously monitored and cleaned.

Mitreh cooling tower antifouling is one of the innovative products of Abrizan company. Using an excellent combination, this product serves all industries and huge buildings that use cooling towers to exchange and remove water heat. By preventing the formation of sediment, the mitreh product increases the performance of this system, a system that plays the role of a heat exchanger.

Just as living organisms cannot survive without water, oil refineries and petrochemical plants cannot function without water. Water is used in water cooling systems, to provide steam and fire extinguishing systems. Petroleum products and fuels produced after distillation and various catalytic and cracking processes must be cooled. Water is the best fluid for this.

Any process that delays corrosion is called corrosion inhibition (prevention of corrosion). In general, corrosion inhibition means reducing the rate of oxidation of a metal or adding a chemical compound that will be in contact with the solution in the system. The corrosion inhibitor may be added in liquid, vapor, or both. Specifically, a corrosion inhibitor is a chemical compound that is added to the liquid phase in such a way that it affects the metal surface.

Mitreh is a superior solution for dealing with scale in various industries. Mitreh scale removal solution, a revolutionary product from Abrizan Industrial Research Company, is an efficient alternative to traditional scale removal methods. This product offers a comprehensive solution to the scale problem in various industries by overcoming the limitations of existing physical and chemical methods.

The impact of various factors on corrosion damage are: 1_ Design, material selection and process 2_ Lack of necessary instructions 3_ Human error 4_ Poor inspection 5_ Poor layout, installation and coordination 6_ Failure to anticipate unwanted events 7_ Other cases

Magnetic anti-scale is a device that works in heating systems by preventing calcium-containing deposits from settling. In this way, in systems that work with water, calcium crystals are neutralized and removed from the system. Of course, as mentioned above, there are drawbacks that cause magnetic anti-scale to have advantages over chemical anti-scale prevention, but also disadvantages that cause it to be ranked lower than anti-scale products such as Mitreh.

Abrizan Industrial Research Knowledge Company, located in Fars Science and Technology Park, has been operating for more than twenty years, producing more than 180 specialized and mostly exclusive products in the field of chemical treatment of industrial waters and wastewater under the Mitreh brand. The company's solutions have different types with different applications.

Automotive Mitreh is added while the radiator is running and performs excellent descaler, this excellent solution prevents the formation of new deposits. Automotive Mitreh has entered the automotive industry market with a new formulation. This solution is supposed to protect your car's engine cooling system.

This term is the name of advanced products with scale removal, anti-scale and anti-corrosion properties that are designed to help optimize energy consumption and solve scale and corrosion problems in industrial water systems. The name "Mitreh" is derived from the ancient word "Mitreh" which means pact, friendship and sun. This name reflects the commitment of the creators of Mitreh to create a friendly relationship between industry and water.

Antifreeze is a colored liquid that mixes with water and helps in regulating the engine in extreme temperatures. and is pumped throughout the engine block to maintain a uniform operating temperature. In addition to temperature regulation, mitreh antifreeze is also effective in preventing corrosion.

When water is used as a thermal fluid, the salts and hardness in the water are separated due to the temperature shock and settle on the surfaces, forming deposits. These deposits are one of the most important factors of erosion and corrosion in heating and cooling installations.