The purpose of this study was to investigate the effectiveness of Mitreh MDA0102 scale remover solution in industrial water environments according to NACE standards in two environments: calcium carbonate and calcium sulfate, and to compare it with acid washing. According to this study, this solution is a non-corrosive solution, unlike the solutions used in acid washing, which greatly increase corrosion. Also, the results of couponing indicated that the presence of Mitreh vector sediment solution will prevent further corrosion by forming a thin layer on the heat transfer surface.

One of the main factors of scale in building installations is the presence of calcium carbonate in water, because the solubility of this compound in water is very low and if the conditions are right, it will precipitate quickly. One of the parts that provides these conditions is the surfaces in contact with water in heat exchangers in domestic gas-fired boilers (heat packages).

Cold Mitreh, a water-soluble solution with a high dissolution rate, is introduced as a powerful scale remover and an innovative product of Abrizan Company. Cold Mitreh was developed in response to the industry's need for an alternative solution to descalers. Descalers are scale removers based on hydrochloric acid and are highly dangerous, toxic, and corrosive.

Abrizan Industrial Research Knowledge Company, located in Fars Science and Technology Park, has been operating for more than twenty years, producing more than 180 specialized and mostly exclusive products in the field of chemical treatment of industrial waters and wastewater under the Mitreh brand. The company's solutions have different types with different applications.

One of the methods of producing fresh water for industrial use is the use of multi-stage thermal desalination plants to desalinate seawater. Due to the high content of soluble and insoluble compounds in seawater and the high temperature shock in desalination packages, sedimentation in these packages is unavoidable. For this reason, periodic sediment removal from desalination plants should be performed.