
The anti-fouling and corrosion effect of mitreh in heating and cooling systems
One of the main factors of scale in building installations is the presence of calcium carbonate in water, because the solubility of this compound in water is very low and if the conditions are right, it will precipitate quickly. One of the parts that provides these conditions is the surfaces in contact with water in heat exchangers in domestic gas-fired boilers (heat packages).

Cooling tower anti-fouling
Mitreh Cooling Tower Anti-Fouling is one of the innovative products of Abrizan Company. This product, using an excellent composition, serves all industries and large buildings that use cooling towers to exchange and remove water heat. Mitreh's product prevents the reduction of the performance of this system by preventing the formation of fouling. A system that plays the role of a heat exchanger.

Cold Mitreh
Cold Mitreh, a water-soluble solution with a high dissolution rate, is introduced as a powerful scale remover and an innovative product of Abrizan Company. Cold Mitreh was developed in response to the industry's need for an alternative solution to descalers. Descalers are scale removers based on hydrochloric acid and are highly dangerous, toxic, and corrosive.

Corrosion inhibitors
Corrosion inhibitors are additives that control corrosion by altering the metal surface, the environment, or both. Their mode of action is to alter the anodic, cathodic, or both reactions. There are many corrosion inhibitors available with different compositions. Most of these materials have been discovered and refined through experimental testing, and many of them are sold under trade names and their chemical composition is kept secret.

Drag reducing agent
In oil pipelines, the majority of pressure drop is due to friction in the pipes. Friction in the pipelines leads to a decrease in flow rate and also increases pumping and energy costs. This friction can be significantly reduced by injecting long-chain polymers (flow improvers).

Comparison of mitreh solution with DM
In order to compare DM and mitreh solution, it should be kept in mind that three different substances should be used for sediment removal, sediment prevention, and corrosion prevention, and in this regard, usually materials such as acids for sediment removal, DM for sediment removal, and in some cases Materials are also used to remove oxygen from water.

Introduction of antifreeze mitreh
Mitreh's antifreeze and antifreeze has a great performance in terms of heat transfer due to its high heat capacity, and it is considered the most economical and available fluid for this purpose. Water alone has a relatively low boiling point, which means that it boils at a high temperature, and it also has a high freezing point, which means that it freezes quickly in the cold, most importantly due to the presence of solutes, ions, dissolved oxygen, etc. Rotting and rusting of facilities and ducts.

Antifoam unit of water desalination by thermal methods
The high surface tension of sea water and the high probability of formation of foam in MED and MSF systems are unpredictable. These foams are usually formed when organic compounds increase in salt water or brine.

All about antifoam and defoamer
Creating a floor can cause many problems and damages. Loss and overflow of edible materials, reduction in efficiency and speed of the process, reduction in the capacity of tanks and even stopping production are among the problems of foaming.

Cooling tower anti-fouling mitreh
Mitreh cooling tower antifouling is one of the innovative products of Abrizan company. Using an excellent combination, this product serves all industries and huge buildings that use cooling towers to exchange and remove water heat. By preventing the formation of sediment, the mitreh product increases the performance of this system, a system that plays the role of a heat exchanger.

Sedimentation and corrosion in refinery and petrochemical water systems
Just as living organisms cannot survive without water, oil refineries and petrochemical plants cannot function without water. Water is used in water cooling systems, to provide steam and fire extinguishing systems. Petroleum products and fuels produced after distillation and various catalytic and cracking processes must be cooled. Water is the best fluid for this.

Ways to prevent corrosion
Any process that delays corrosion is called corrosion inhibition (prevention of corrosion). In general, corrosion inhibition means reducing the rate of oxidation of a metal or adding a chemical compound that will be in contact with the solution in the system. The corrosion inhibitor may be added in liquid, vapor, or both. Specifically, a corrosion inhibitor is a chemical compound that is added to the liquid phase in such a way that it affects the metal surface.

Remove the sediment solution Mitreh
Mitreh is a superior solution for dealing with scale in various industries. Mitreh scale removal solution, a revolutionary product from Abrizan Industrial Research Company, is an efficient alternative to traditional scale removal methods. This product offers a comprehensive solution to the scale problem in various industries by overcoming the limitations of existing physical and chemical methods.

Types of heat exchangers in the industry
There are various types of heat exchangers in the industry, examples of which include: double-tube, plate, spiral tube and shell-and-tube heat exchangers, each of which has its own working method. Also, each heat exchanger has its own advantages and disadvantages.

Magnetic anti-fouling
Magnetic anti-scale is a device that works in heating systems by preventing calcium-containing deposits from settling. In this way, in systems that work with water, calcium crystals are neutralized and removed from the system. Of course, as mentioned above, there are drawbacks that cause magnetic anti-scale to have advantages over chemical anti-scale prevention, but also disadvantages that cause it to be ranked lower than anti-scale products such as Mitreh.

Anti-fouling mitreh
It has been about a decade since a new anti-scale solution entered the market, an anti-scale that plays an important role in protecting all types of heating and cooling systems from the formation of scale. This specialized product is called Mitreh and is a new invention of the Abrizan Company.